Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
SEAT FRAME TIGHTENING TORQUES
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|---|
| Seat frame fastening screw to backrest frame | -1, 2- . See Figure . | M8 | 23 (17) |
| Cross tube fastening screw to seat frame | -3- . See Figure . | M8 | 23 (17) |
| Holding tray fastening screw to fire extinguisher holder | -8- . See Figure . | M5 | 5.6 (4) |
| Fastening screw on fire extinguisher holder to seat frame | -12- . See Figure . | M5 | 5.6 (4) |
| Pneumatic spring fastening nut to seat frame/cross tube | -15- . See Figure . | M5 | 5.6 (4) |
| Adapter fastening screw to seat frame | -18- . See Figure . | M8 | 23 (17) |
| Adapter fastening nut to seat rail | -21- . See Figure . | M8 | 23 (17) |
| Cross tube fastening screw to seat rail | -26- . See Figure . | M8 | 23 (17) |
| Belt buckle fastening screw to seat frame | -35- . See Figure . | M10 | 50 (37) |
| Control module fastening screw to holder | -40- . See Figure . | M5 | 5.6 (4) |
| Holder fastening screw to seat frame | -40- . See Figure . | M5 | 5.6 (4) |
| Input shaft fastening screw to seat frame | -43- . See Figure . | M5 | 5.6 (4) |