Removing and installing the instrument panel
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Before removing the instrument panel, it must be disassembled. See DISASSEMBLING THE DASHBOARD .
INSTRUMENT PANEL REMOVING AND INSTALLING PROCEDURE
| No. | Designation | Qty. | Removal | Installation |
|---|---|---|---|---|
| 1 | Fastening screws | 3 | Unscrew fastening screws -1-4- . See Fig 1 . | Screw the instrument panel -4-1- . See Fig 1 . |
| 2 | Fastening screws | 13 | Undo fastening screws-2-4- . See Fig 1 . | Screw the instrument panel -4-2- . See Fig 1 . |
| 3 | On-Board Diagnosis (OBD) socket | 1 | Unscrew the fastening screws -2- . See Fig 1 . | Tighten the fastening screws -2- . See Fig 1 . |
| 4 | Instrument panel | 1 | See: Position -1 and 2- . See Fig 1 . | See: Position -1 and 2- . See Fig 1 . |
| 5 | Sheetmetal nut | 2 | Unscrew the fastening screws -2- . See Fig 1 . | Inspect and replace if necessary. |
| 6 | Instrument panel bracket with knee protector strip | 1 | ||
| 7 | Sheetmetal nut | 11 | Unscrew fastening screws -1 and 2-4- . See Fig 1 . | Inspect and replace if necessary. |