Tightening torque
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
INSTRUMENT PANEL & BRACKET TIGHTENING TORQUE SPECIFICATION (AS OF MY 2003)
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) | |
|---|---|---|---|---|
| A-pillar fastening screws on the instrument panel bracket | -8- . See Figure . | M8 | 23 | (17) |
| Cowl panel fastening screws on the instrument panel bracket | -11- . See Figure . | M6 | 10 | (7.5) |
| Knee protector strip fastening nuts on the instrument panel bracket | -14- . See Figure . | M6 | 10 | (7.5) |
| Knee protector fastening screws on the instrument panel bracket | -15- . See Figure . | M8 | 6 | (4.5) |
| Cover panel fastening screws on the instrument panel bracket (tunnel) | -20- . See Figure . | M6 | 10 | (7.5) |
| Cover panel fastening screws on the instrument panel bracket | -26- . See Figure . | M6 | 10 | (7.5) |