Removing side-panel lining
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
SIDE-PANEL LINING REMOVING PROCEDURE (TARGA)
| No. | Procedure | Instructions |
|---|---|---|
| Removing B-pillar | See REMOVING AND INSTALLING A, B AND C-PILLARS - TARGA . | |
| 1 | Pulling off cover | Pull cover -2-arrow- . See Fig 1 . |
| 2 | Unscrewing fastening screw. | Unscrew fastening screw -3- . See Fig 1 . |
| 3 | Undoing side-panel lining | Unscrew hexagon socket -5-6-1-arrow- . See Fig 1 . |
| 4 | Disconnecting the electrical plug connections | Press the lug -small arrow-7- . See Fig 1 . |