LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing side-panel lining - Cabriolet, as of MY 1997 >> Removing side-panel lining

Removing side-panel lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Side-Panel Lining (Cabriolet, As Of MY 1997)
G03106065Courtesy of PORSCHE OF NORTH AMERICA, INC.
SIDE-PANEL LINING REMOVING PROCEDURE (CABRIOLET, AS OF MY 1997)

No. Procedure Instructions
1 Folding over emergency seat backrest Unlock emergency seat backrest and fold over.
2 Removing holding pegs and cover Unscrew holding pegs -2-3-  . See Fig 1 .
3 Pulling off cover Pull cover -4-5-6-1-7-  . See Fig 1 .
4 Removing side-panel lining Loosen the fastening screws -9-12-1-11-1-8-  . See Fig 1 .
scientia non olet · About LEMON Manuals