LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing side-panel lining - Cabriolet, as of MY 1997 >> Installing side-panel lining

Installing side-panel lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Side-Panel Lining (Cabriolet, As Of MY 1997)
G03106066Courtesy of PORSCHE OF NORTH AMERICA, INC.
SIDE-PANEL LINING INSTALLING PROCEDURE (CABRIOLET, AS OF MY 1997)

No. Procedure Instructions
1 Mount the side-panel lining Insert pegs of the side-panel lining -1-8-12-11-1-9-  . See Fig 1 .
2 Fitting holding pegs and cover Position the cover trim -3-2-  . See Fig 1 .
3 Fit cover Press in collar -7-5-6-4-5-  . See Fig 1 .
4 Fit seal Lift up the pillar seal along the side-panel lining using a plastic spatula -arrow-  . See Fig 1 .
scientia non olet · About LEMON Manuals