LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing roof lining (roof rail flange cover) - Targa >> Test and adjusting values

Test and adjusting values

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
ROOF RAIL FLANGE COVER ADJUSTING VALUES (TARGA)

Designation Dimension Note
Roof rail at side of rear centre panel -X-  . See Figure . 1 mm Set gap on left and right