LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing rear wall lining - Targa >> Removing rear wall lining

Removing rear wall lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Rear Wall Lining (Targa)
G03106090Courtesy of PORSCHE OF NORTH AMERICA, INC.
REAR WALL LINING REMOVING PROCEDURE (TARGA)

No. Procedure Instructions
1 Removing rear wall lining Hold rear wall lining at the side underneath and carefully pull out of the clips in the -direction of arrow-  . See Fig 1 .
2 Unscrewing rubber adjustment stop Unscrew rubber adjustment stop -2-  . See Fig 1 .
3 Removing the cover Unscrew fastening screws -3, 4-6-  . See Fig 1 .
scientia non olet · About LEMON Manuals