LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing rear wall lining - Targa >> Install rear wall lining

Install rear wall lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Rear Wall Lining (Targa)
G03106091Courtesy of PORSCHE OF NORTH AMERICA, INC.
REAR WALL LINING INSTALLING PROCEDURE (TARGA)

No. Procedure Instructions
1 Installing cover Position cover -6-3, 4-5-  . See Fig 1 .
2 Screwing in rubber adjustment stop Screw in rubber adjustment stop -2-  . See Fig 1 .
3 Installing rear wall lining Position rear wall lining and press into place in the -direction of arrow-  . See Fig 1 .
scientia non olet · About LEMON Manuals