Removing and installing oddments compartment lid
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
ODDMENTS COMPARTMENT LID REMOVING AND INSTALLING PROCEDURE (AS OF MY 1997)
| No. | Designation | Qty. | Removal | Installation |
|---|---|---|---|---|
| 1 | Door trim panel | |||
| 2 | Snap ring 11 x 1 | 1 | Remove the snap ring -2- . See Fig 1 . | Put the snap ring onto the shaft with a snap ring pliers -3- . See Fig 1 . |
| 3 | Shaft | 1 | Pull the shaft -3-6-4- . See Fig 1 . | Position lid -4-1-6-3- . See Fig 1 . |
| 4 | Lid for oddments compartment | 1 | To remove lid for oddments compartment -4- . See Fig 1 . | |
| 5 | Oval-head screw 4.2 x 14 | 2 | ||
| 6 | Guide mechanism | 1 | Undo sheetmetal screws-5- . See Fig 1 . | Position the guide mechanism -6-5- . See Fig 1 . |