LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing member trim - Targa, as of MY 2002 >> Removing roof member trim

Removing roof member trim

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Roof Member Trim (Targa, As Of MY 2002)
G03106085Courtesy of PORSCHE OF NORTH AMERICA, INC.
ROOF MEMBER TRIM REMOVING PROCEDURE (TARGA, AS OF MY 2002)

No. Procedure Instructions
  Removing A and C-pillars See REMOVING AND INSTALLING A, B AND C-PILLARS - TARGA  .
1 Removing rear belt cover Reach into the cover -2-3, 4-5-1-  . See Fig 1 .
2 Unscrewing the front fastening screw Unscrew the fastening screw -6-7-8-  . See Fig 1 .
3 Removing roof member trim Unscrew fastening screws -9-10-8-direction of arrow-  . See Fig 1 .