Installing roof rail trim

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Roof Rail Trim (Targa, As Of MY 2002)

Courtesy of PORSCHE OF NORTH AMERICA, INC.

ROOF RAIL TRIM INSTALLING PROCEDURE (TARGA, AS OF MY 2002)

No.	Procedure	Instructions
1	Installing roof rail trim	Position roof member trim -8-10-9- . See Fig 1 .
2	Screwing in the front fastening screw	Position the fastening screw -6-7-8- . See Fig 1 .
3	Installing rear belt cover	Position belt cover -5-3,4-2-1- . See Fig 1 .
	Installing A and C-pillars	See REMOVING AND INSTALLING A, B AND C-PILLARS - TARGA .