LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing front luggage compartment trim >> Removing and installing trims units - Carrera 4

Removing and installing trims units - Carrera 4

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing And Installing Trims Units - Carrera 4
G03106025Courtesy of PORSCHE OF NORTH AMERICA, INC.
REMOVING AND INSTALLING TRIMS UNITS PROCEDURE - CARRERA 4

No. Designation Qty. Removal Installation
1 Cam 2 Turn 90° and remove. Position and turn 90°.
2 Interior light 1 Press out. Press in.
3 Fastening screws 3 Unscrew. Screw in.
4 Trim units 1 Unscrew fastening screws -3-  . See Fig 1 . Screw in fastening screws -3-  . See Fig 1 .
5 Holder 2    
6 Holder 2    
scientia non olet · About LEMON Manuals