LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing Cabriolet roof trims - as of model year 2002 >> Removing rear roof lining

Removing rear roof lining

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Rear Roof Lining (Cabriolet, As Of MY 2002)
G03106055Courtesy of PORSCHE OF NORTH AMERICA, INC.
REAR ROOF LINING REMOVING PROCEDURE (CABRIOLET, AS OF MY 2002)

No. Procedure Instructions
  Opening the side Velcro fastening Open the velcro fastening on the side roof lining on the left and right. See:
1 Open zip fastener. Disconnect the rear roof lining from the convertible-top cover by opening the zip fastener -17-  . See Fig 1 .
2 Disconnecting push-button Disconnecting push-button -18-  . See Fig 1 .
3 Unscrewing the connection Unscrew fastening screw -19-Z-21-  . See Fig 1 .
4 Removing tension hook of side metal struts Bend brace-20-direction of arrow-21-  . See Fig 1 .
5 Opening the Velcro fastening Open the velcro fastening -22-  . See Fig 1 .
6 Undoing connection on tension bow Press connection -23-  . See Fig 1 .
7 Pulling out connection on the rear window Pull connection -24-  . See Fig 1 .
scientia non olet · About LEMON Manuals