Installing rear roof lining
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
REAR ROOF LINING INSTALLING PROCEDURE (CABRIOLET, AS OF MY 2002)
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Fitting roof lining connection for the rear window | Lift the metal clips using a plastic spatula -A-B-24-C-D- . See Fig 1 . |
| 2 | Installing roof liner connection to tension bow? | Press the roof lining connection -23- . See Fig 1 . |
| 3 | Installing brace of side metal struts | Insert brace -20- . See Fig 1 . |
| 4 | Tightening fastening screws | Position the bracing strap -Z-21-19- . See Fig 1 . |
| 5 | Closing the Velcro fastening. | Close the velcro fastening -22- . See Fig 1 . |
| 6 | Closing the push-button | Close push-button -18- . See Fig 1 . |
| 7 | Closing zip fastener | Connect the rear roof lining to the main bow connection above the corner bow using the zip fastener -17- . See Fig 1 . |
| Closing the Velcro fastening of the side roof lining | Close the velcro fastening on the side roof lining on the left and right. See: |