Installing front roof lining
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
FRONT ROOF LINING INSTALLING PROCEDURE (STEPS 1-5) (CABRIOLET, AS OF MY 2002)
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Installing roof lining connection at the corner bow | Insert and center the roof lining connection -16-direction of arrow-15- . See Fig 1 . |
| 2 | Pulling in bracing strap | Pull bracing strap -X-V- . See Fig 1 . |
| 3 | Fitting velcro fastening | Press the velcro fastening -13- . See Fig 1 . |
| 4 | Installing bracing straps | Position bracing strap -Y-X-14- . See Fig 1 . |
| Closing the Velcro fastening of the side roof lining | Close the velcro fastening on the side roof lining on the left and right. See: REMOVING AND INSTALLING SIDE ROOF LINING . | |
| 5 | Installing clamping rail connection from the main bow | Unscrew clamping rail connection -10-direction of arrow-9- . See Fig 1 . |
FRONT ROOF LINING INSTALLING PROCEDURE (STEPS 6-10) (CABRIOLET, AS OF MY 2002)
| No. | Procedure | Instructions |
|---|---|---|
| 6 | Installing roof lining connection on front roof frame 2 | Position cover strip -8-7- . See Fig 2 . |
| 7 | Pushing on the clamping rail at the rear | Push sewn-on clamping rail -6- . See Fig 2 . |
| 8 | Pushing on front clamping rail | Push front sewn-on clamping rail -5- . See Fig 2 . |
| 9 | Tightening front clamping rail | Tighten the connection on the left and right with the fastening screws -4- . See Fig 2 . |
| 10 | Installing convertible-top lock | Plug in electrical plug connection -3-2-1- . See Fig 2 . |
| Ending service position |