LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing Cabriolet roof lining - up to model year 2001 >> Removing and installing side roof lining >> Removing roof lining at sides of roof frame 3

Removing roof lining at sides of roof frame 3

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Opening the Velcro fastening

    Disconnect the velcro fastening connection -11a- between the roof lining -11- at the side and the corner bow -11b- in -direction of arrow-.

    Fig 1: Disconnecting Velcro Fastening Connection Between The Roof Lining At The Side And The Corner Bow (Cabriolet, Up To MY 2001)
    G03106046Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Removing roof lining at sides of roof frame 3
    1. Drill out the fastening rivets -12a-. Remove the roof lining at the side -11- and the plastic insert -12b-.
    Fig 2: Removing Roof Lining At Sides Of Roof Frame 3 (Cabriolet, Up To MY 2001)
    G03106047Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals