LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Linings, Insulation - 911 CARRERA (996)) >> Removing and installing A-pillar trim - Cabriolet >> Removing A-pillar trim

Removing A-pillar trim

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing A-Pillar Trim (Cabriolet)
G03106071Courtesy of PORSCHE OF NORTH AMERICA, INC.
A-PILLAR TRIM REMOVING PROCEDURE (CABRIOLET)

No. Procedure Instructions
1 Remove convertible-top peg housing Unscrew fastening screw -1-2-  . See Fig 1 .
2 Unclip the A-pillar trim Pull the A-pillar trim -7-direction of arrow-  . See Fig 1 .
3 Remove the A-pillar trim Remove the A-pillar trim -3-in the direction of the arrow-  . See Fig 1 .
scientia non olet · About LEMON Manuals