After triggering of belt tensioner
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
After triggering of a belt tensioner, driver's and/or passenger's unit
After triggering one or more air bag units (driver's, passenger's, and/or side airbag).
- All belt tensioner units
- Because it is difficult to visually determine if one or both belt tensioners has been triggered, check the following points.
- Read out the airbag fault memory with the Porsche System Tester.
- Check plug connection on the belt tensioner for damage.
- Pull out the belt strap as far as possible and check for wear.
- Perform a function test on the automatic belt device.