LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Passenger Protection - 911 CARRERA (996)) >> Removing and installing the triggering unit for the airbag >> Installing triggering unit for airbag

Installing triggering unit for airbag

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The fastening points on the body must be metallically bright!
  • Use a 1/4 inch Allen key to tighten the shear-off nuts!
  • A new triggering unit must be locked after it has been installed!

Tightening torque of the M6 hexagon nut: 10 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals