Assembling release for front lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Assembling Release For Front Lid (Driver's Side) - As Of Model Year 2001

Courtesy of PORSCHE OF NORTH AMERICA, INC.

FRONT LID RELEASE ASSEMBLING PROCEDURE (DRIVER'S SIDE) - AS OF MODEL YEAR 2001

No.	Procedure	Instructions
1	Installing actuating switch for front lid -7- . See Fig 1 .	Clip locking tabs of the actuating switch for the front lid -7- . See Fig 1 .
2	Joining plug connections -5, 6- . See Fig 1 .	Push plug connections -5, 6- . See Fig 1 .
3	Attaching sill -1- . See Fig 1 .	Clip in new fastening clips -4-1- . See Fig 1 .
4	Tightening hexagon socket head bolts -2- . See Fig 1 .	Screw in hexagon socket head bolts -2-3- . See Fig 1 .