LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior Equipment - 911 CARRERA (996)) >> Removing and installing glove compartment, - as of MY 2002 >> Installing glove compartment

Installing glove compartment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Glove Compartment - As Of MY 2002
G03055935Courtesy of PORSCHE OF NORTH AMERICA, INC.
GLOVE COMPARTMENT INSTALLATION PROCEDURE - AS OF MY 2002

No. Procedure Instructions
1 Connecting electrical plug connection Connect the electrical plug connection in the -direction of the arrow-  . See Fig 1 .
2 Installing glove compartment Swivel the glove compartment into the dashboard in the -direction of the arrow-A-  . See Fig 1 .
3 Screwing in the front fastening screws Screw in the fastening screws -4-  . See Fig 1 .
4 Screwing in the rear fastening screws Screw in the fastening screws -3-  . See Fig 1 .
5 Fitting the plastic clips Position the insulation, making sure that the corners are inserted correctly under the dashboard. Press in the plastic clips -2-  . See Fig 1 .
scientia non olet · About LEMON Manuals