Removing and installing bracket
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
REMOVAL/INSTALLATION PROCEDURE OF BRACKET
| No. | Designation | Qty. | Removal | Installation |
|---|---|---|---|---|
| 3 | Fastening screw | 2 | Unscrew. | Tightening torque: See TIGHTENING TORQUES . |
| 4 | Bracket | 1 | ||
| 5 | Spacer sleeve | 2 | Position spacer sleeve -5-4-3- . See Fig 1 . | |
| 6 | Cover caps | 2 | Pull out. | Press in. |