LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Interior Equipment - 911 CARRERA (996)) >> Removing and installing cup holder, - as of MY 2002 >> Installing cup holder

Installing cup holder

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installing cup holder

    Push cup holder -2- into the shaft of the retaining bracket -3-. Make sure that the metal clip -1- engages.

    Fig 1: Pushing Cup Holder Into Bracket & Engaging Metal Clip - As Of MY 2002
    G03055945Courtesy of PORSCHE OF NORTH AMERICA, INC.

    Refer to DISASSEMBLING AND ASSEMBLING THE DASHBOARD, - AS OF MY 1997 .

scientia non olet · About LEMON Manuals