Overview of tools and materials
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The following tools and materials are required for removing and installing the windscreen with 2-component adhesive:
WINDSCREEN TOOLS AND MATERIALS DESCRIPTION (A, B, C, D, H)
| Item | Designation | Source | Remarks |
|---|---|---|---|
| -A- . See Fig 1 . | |||
| -B- . See Fig 1 . | |||
| -C- . See Fig 1 . | |||
| -D- . See Fig 1 . | |||
| -H- . See Fig 1 . | Contains set components H1-H8 |
WINDSCREEN TOOLS AND MATERIALS DESCRIPTION (H)
| Item | Designation | Item | Designation |
|---|---|---|---|
| -H1- . See Fig 1 . | Cleaning solution | -H5- . See Fig 1 . | Cartridge, component A |
| -H2- . See Fig 1 . | Primer | -H6- . See Fig 1 . | Cartridge, component B |
| -H3- . See Fig 1 . | Activator | -H7- . See Fig 1 . | Mixing nozzle |
| -H4- . See Fig 1 . | Swab | -H8- . See Fig 1 . | Processing nozzle |
WINDSCREEN TOOLS AND MATERIALS DESCRIPTION (A, B)
| Item | Designation | Source | Remarks |
|---|---|---|---|
| -A- . See Fig 2 . | Contains set components A1-A9 | ||
| -B- . See Fig 2 . |
WINDSCREEN TOOLS AND MATERIALS DESCRIPTION (A)
| Item | Designation | Item | Designation |
|---|---|---|---|
| -A1- . See Fig 2 . | Guide rails | -A6- . See Fig 2 . | Filler |
| -A2- . See Fig 2 . | Cutting tool (wire holder) | -A7- . See Fig 2 . | Steering roller with arm bracket |
| -A3- . See Fig 2 . | Spooling device | -A8- . See Fig 2 . | Handle |
| -A4- . See Fig 2 . | Awl | -A9- . See Fig 2 . | Square cutting wire |
| -A5- . See Fig 2 . | Guide rails |