Overview of tools and materials
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The following tools and materials are required for removal and installation of the rear window with two-component adhesive:
REAR WINDOW (HARDTOP) TOOLS AND MATERIAL DESCRIPTION (A, B, C, D, E, H)
| Item | Designation | Source | Remarks |
|---|---|---|---|
| -A- . See Fig 1 . | |||
| -B- . See Fig 1 . | |||
| -C- . See Fig 1 . | |||
| -D- . See Fig 1 . | |||
| -E- . See Fig 1 . | |||
| -H- . See Fig 1 . | Contains set components H1-H8 |
REAR WINDOW (HARDTOP) TOOLS AND MATERIAL DESCRIPTION (H)
| Item | Designation | Item | Designation |
|---|---|---|---|
| -H1- . See Fig 1 . | Cleaning solution | -H5- . See Fig 1 . | Cartridge, component A |
| +H2- . See Fig 1 . | Primer | -H6- . See Fig 1 . | Cartridge, component B |
| +H3- . See Fig 1 . | Activator | +H7- . See Fig 1 . | Mixing nozzle |
| +H4- . See Fig 1 . | Swab | -H8- . See Fig 1 . | Processing nozzle |