LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Glasses, Window Control - 911 CARRERA (996)) >> Removing and installing rear glass window of Cabriolet, - as of MY 2002 >> Removing rear glass of Cabriolet

Removing rear glass of Cabriolet

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Rear Window Glass Of Cabriolet Components (As Of MY 2002)
G03055859Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • The rear glass window can be fitted into the vehicle when the convertible-top covering is installed or removed.
  • The rear glass window should always be installed first into the convertible-top covering when replacing the convertible-top covering.
REAR GLASS OF CABRIOLET COMPONENTS REMOVING PROCEDURE (AS OF MY 2002)

No. Procedure Instructions
  Removing roof lining at the front at rear Refer to REMOVING AND INSTALLING CABRIOLET ROOF TRIMS - AS OF MODEL YEAR 2002 .
1 Disconnecting the electrical plug connection Disconnect electrical plug connection of the rear window heater -1, 2, 3-  . See Fig 1 .
2 Detaching connection and tension strap Detach the connection to the convertible-top covering -6-4-5-  . See Fig 1 .
3 Removing metal clips Insert a plastic spatula -direction of arrow A-7-direction of arrow B-  . See Fig 1 .
4 Removing rear window Remove the rear window -5-8-  . See Fig 1 .
scientia non olet · About LEMON Manuals