LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Glasses, Window Control - 911 CARRERA (996)) >> Removing and installing rear glass window of Cabriolet, - as of MY 2002 >> Installing rear glass window of Cabriolet

Installing rear glass window of Cabriolet

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Rear Window Glass Of Cabriolet Components (As Of MY 2002)
G03055860Courtesy of PORSCHE OF NORTH AMERICA, INC.
CAUTION: Leak (entry of water) in rear glass window!
  • The metal clips are designed to be fitted only once.
  • Always replace the metal clips after removal -7-  . See Fig 1 .
  • Only fit the metal clips with the circlip pliers -Porsche special tool No. 9697-
REAR WINDOW GLASS OF CABRIOLET COMPONENTS INSTALLING PROCEDURE (AS OF MY 2002)

No. Procedure Instructions
1 Positioning rear window and aluminium frame on the convertible-top covering
NOTE: Two persons are required for the work step. Position rear window -5-  and aluminium frame -5a-  on convertible-top covering -8-  . See Fig 1 . The aluminium frame and the rear window are initially held on the convertible-top covering with vice-grip wrenches on the left and right. See Tools and materials  .
  1. Ensure that the markings -C, D-  correspond at the top and bottom. See Fig 1 .
  2. Check whether the edge frame -5c-  of the convertible-top covering is showing evenly all the way round and correct if necessary. See Fig 1 .
2 Pushing the metal clips onto the aluminium frame Push new metal clips -7-F-  . See Fig 1 .
3 Installing rear roof lining Push in the connection seal -10-9-E-  . See Fig 1 .
4 Installing metal clips Knock the metal clips -7-7-  . See Fig 1 .
  Only when replacing convertible-top covering. Refer to REPLACING CONVERTIBLE-TOP COVERING WITH FLEXIBLE REAR WINDOW and REPLACING CONVERTIBLE-TOP COVERING WITH GLASS REAR WINDOW .
  Installing convertible-top covering  
5 Attaching connection and tension strap Attach the tension strap -4-X-Y-  . See Fig 1 .
6 Connecting electrical plug connection Plug in electrical plug connection -1, 2, 3-  . See Fig 1 .
  Installing roof lining. Refer to REMOVING AND INSTALLING CABRIOLET ROOF TRIMS - AS OF MODEL YEAR 2002 .
scientia non olet · About LEMON Manuals