LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Glasses, Window Control - 911 CARRERA (996)) >> Removing and installing power window motor >> Installing power window motor

Installing power window motor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Guide power window motor through the loudspeaker cut-out and insert in the toothing. Tighten fastening pins of power window motor.
  2. Engage electrical plug connection.
  3. Push power window unit onto fastening pins.
  4. Tighten the three fastening nuts on the power window motor.
  5. Carefully glue the moulded foam part onto the inside of the door (protects against water leaking in).
  6. Install loudspeaker unit and door panel.
  7. Connect the battery.
scientia non olet · About LEMON Manuals