LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Glasses, Window Control - 911 CARRERA (996)) >> Removing and installing closing aid - Targa >> Removing closing aid

Removing closing aid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Closing Aid Components - Targa
G03055864Courtesy of PORSCHE OF NORTH AMERICA, INC.
CLOSING AID COMPONENTS REMOVING PROCEDURE (TARGA)

No. Procedure Instructions
1 Removing rear wall lining Hold rear cover at the side underneath and carefully pull out of the clips in the -direction of arrow-  . See Fig 1 .
2 Folding closing aid over Unscrew the fastening screws -1-inset-  . See Fig 1 .
3 Unscrewing support strut Undo hexagon nut -2-  . See Fig 1 .
4 Undoing microswitch plug connection Turn the plug unit -arrow-3-4-A-arrow B-4-3-  . See Fig 1 .
scientia non olet · About LEMON Manuals