LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Glasses, Window Control - 911 CARRERA (996)) >> Removing and installing closing aid - Targa >> Position of closing aid

Position of closing aid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

The position of the closing aid affects the ejection height and the chafing noises at the rear lid. After opening the rear lid, the ejection height should be X = 16 mm. 

Fig 1: Identifying Position Of Closing Aid Dimension - Targa
G03055866Courtesy of PORSCHE OF NORTH AMERICA, INC.