Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - CONVERTIBLE-TOP FRAME FASTENER
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|---|
| Fastening screws of convertible-top support on inner side section | Procedure No. 1, item -3- . See Figure. | M8 | 23 (17) Nm (ftlb.) |
| Fastening nut of convertible-top support on inner side section | Procedure No. 1, item -2- . See Figure. | M8 | 23 (17) Nm (ftlb.) |
| Fastening screw of main bow on convertible-top support | Procedure No. 5, item -17- . See Figure. | M6 | 9 (6.5) Nm (ftlb.) |
| Fastening screws of centring pegs on roof frame 1 | Procedure No. 9, item -25- . See Figure. | 7 (5) Nm (ftlb.) | |
| Fastening screws of wedge on main bow | Procedure No. 10, item -28- . See Figure. | M5 | 2.8 (2) Nm (ftlb.) |
| Bracket or plastic bracket fastening screws on roof frame 3 | Procedure No. 12, item -33- . See Figure. | M5 | 2.8 (2) Nm (ftlb.) |
| Potentiometer fastening screws on convertible-top support | Procedure No. 15, item -35- . See Figure. | 2.8 (2) Nm (ftlb.) | |
| Fastening screws of tension strap on roof frame 1 | Procedure No. 18, item -42- . See Figure. | 5 (3.5) Nm (ftlb.) | |
| Fastening screws of plastic panel on roof frame 1 | Procedure No. 22, item -45- . See Figure. | 5 (3.5) Nm (ftlb.) | |
| Draught deflector fastening screws on styling frame | Procedure No. 24, item -47- . See Figure. | 1.7 (1.5) Nm (ftlb.) | |
| Styling frame fastening screws on roof frame 3 | Procedure No. 24, item -49- . See Figure. | M 3 | 1.7 (1.5) Nm (ftlb.) |
| Fabric guide plate fastening screws on styling frame | Procedure No. 25, item -52- . See Figure. | 1.7 (1.5) Nm (ftlb.) | |
| Styling frame fastening screws on roof frame 2 | Procedure No. 25, item -53- . See Figure. | M 6 | 9 (6.5) Nm (ftlb.) |
| Aluminium profile fastening screws on roof frame 3 | Procedure No. 26, item -55- . See Figure. | M 3 | 1.7 (1.5) Nm (ftlb.) |
| Aluminium profile fastening screws on roof frame 2 | Procedure No. 27, item -58- . See Figure. | M 3 | 1.7 (1.5) Nm (ftlb.) |