Installing seals on the styling frame

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Installing seal on styling frame (roof frame 3)
1. Position aluminium profile -54- on the styling frame -48- and screw on with the fastening screws -55- . See Fig 1.
2. Insert the seal -56- into the aluminium profile -54- . See Fig 1.
Tightening torque: 1.7 Nm (1.0 ftlb.)

Fig 1: Installing Seal On Styling Frame (Roof Frame 3)
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Installing seal on styling frame (roof frame 2)
1. Position aluminium profile -57- on the styling frame -51- and screw on with the fastening screws -58- . See Fig 2.
2. Insert the seal -59- into the aluminium profile -57- . See Fig 2.
Tightening torque: 1.7 Nm (1.0 ftlb.)

Fig 2: Installing Seal On Styling Frame (Roof Frame 2)
Courtesy of PORSCHE OF NORTH AMERICA, INC.