Additional assembly instructions for installing electrical wiring harness as of model year 2002 (convertible top with glass window)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Installing wiring harness of rear window heating
1. Lay wiring harness as shown in the illustration.
2. Fit the tie-wrap -38- . See Fig 1.
3. Position the fastening clips -40- and tighten with the fastening screws -39- . See Fig 1.
Fig 1: Installing Wiring Harness Of Rear Window Heating - As Of Model Year 2002 (Convertible Top With Glass Window)
Courtesy of PORSCHE OF NORTH AMERICA, INC.