Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - CONVERTIBLE-TOP COVERING (WITH FLEXIBLE REAR WINDOW) FASTENER
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|---|
| Fastening screws of shaped sheetmetal part on main bow | For installation, procedure No. 4 item -B- . See Figure. | M 3.5 | 1.7 (1.5) Nm (ftlb.) |
| Fastening screws of wedge on main bow | For installation, procedure no. 4 item -A- . See Figure. | M5 | 2.8 (2) Nm (ftlb.) |
| Fastening screws of shaped sheetmetal part of convertible top covering on roof frame 1 | For installation, procedure No. 5, item -13- . See Figure. | 5 (3.5) Nm (ftlb.) | |
| Fastening screws of convertible-top seal on roof frame 1 | For installation, procedure No. 7, item -11- . See Figure. | 1.7 (1.5) Nm (ftlb.) | |
| Fastening screws of retaining rail on roof frame 1 | For installation, procedure No. 7, item -9- . See Figure. | 3.5 (2.5) Nm (ftlb.) | |
| Fastening screws of retaining rail on roof frame | For installation, procedure No. 8, item -8- . See Figure. | 2.8 (2) Nm (ftlb.) | |
| Fastening screws of tension cable on main bow | For installation, procedure No. 9, item -4- . See Figure. | 7 (5) Nm (ftlb.) | |
| Fastening screws of tension bow seal on tension bow | For installation, procedure No. 11, item -2- . See Figure. | 5 (3.5) Nm (ftlb.) |