LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing motor for rear side section flap >> Installing motor

Installing motor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installing motor

    Insert motor into the spindle guide with the spindle and fasten with Torx screws.

    Install wires for micro switches into the plug connect and clip in wires.

  2. Install rear side section flap and perform a function test

    See REMOVING AND INSTALLING REAR SIDE SECTION FLAP .

scientia non olet · About LEMON Manuals