LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing microswitch for convertible-top compartment lid >> Removing microswitch for convertible-top compartment lid

Removing microswitch for convertible-top compartment lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move convertible top to service position.

    See REMOVING CONVERTIBLE TOP .

  2. Remove cover over the engine

    To loosen the carpet, pull out the plastic clips with the special tool 21 and fold back the carpet over the microswitch.

  3. Removing microswitches

    Disconnect electrical plug connection -4-  . Press locking tab and push the plug connection down and out. See Fig 1.

    Undo fastening screw -1-  and lift the retaining bracket -2-  with microswitch up and out. See Fig 1.

    Remove both tab washers -3-  and take out the microswitch. See Fig 1.

    Fig 1: Removing Microswitch For Convertible Top Compartment Lid
    G03055707Courtesy of PORSCHE OF NORTH AMERICA, INC.