LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing microswitch for convertible-top compartment lid >> Installing the microswitch for convertible-top compartment lid

Installing the microswitch for convertible-top compartment lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installing microswitch

    Fasten microswitch on the retaining bracket -2-  with tab washers -3-  and install. See Figure.

    Engage electrical plug connection -4-  and perform a function test. See Figure.

  2. Lay carpet over the microswitch

    Fold the carpet forward again and fasten with the plastic clips.

scientia non olet · About LEMON Manuals