Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION - HYDRAULIC PUMP, AS OF MY 2003
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|---|
| Fastening nuts, bracket with hydraulic pump to frame for roll-over protection system | -2- . See Figure. | M6 | 10 (7.5) |
| Hydraulic lines to hydraulic pump | -5A, 5B- . See Figure. | 12+2 (9+1.5 ) | |
| Plug on hydraulic pump | -8- . See Figure. | 10+1 (7.5+0.5 ) |