Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS - HYDRAULIC CYLINDERS FASTENER (AS OF MY 2002)
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|---|
| Fastening nuts, hydraulic cylinder to convertible-top support | -1- . See Figure. | M8 | 17 +/- 2 (13 +/- 1.5) |
| Guide pin on hydraulic cylinder | -3- . See Figure. | 11 +/- 1 (8 +/- 0.5) | |
| Convertible-top pin on hydraulic cylinder | -4- . See Figure. | 12 +/- 1 (9 +/- 0.5) | |
| Hydraulic lines to hydraulic pump | -5A, 5B- . See Figure. | 12+2 (9+1.5 ) | |
| Plug on hydraulic pump | -8- . See Figure. | 10+1 (7.5+0.5 ) |