Installing hardtop
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
HARDTOP INSTALLATION PROCEDURE AND INSTRUCTIONS (STEPS 1-2)
| No. | Procedure | Instructions |
|---|---|---|
| Open all four side windows | ||
| 1 | Opening the locking lever | The locking lever -3- . See Fig 1. |
| 2 | Lifting off plastic covers | Take unlocking handle -4-5-7- . See Fig 1. |
CAUTION:
The hardtop lining and windstop can be damaged! Remove the windstop before fitting the hardtop.
HARDTOP INSTALLATION PROCEDURE AND INSTRUCTIONS (STEPS 3-7)
| No. | Procedure | Instructions |
|---|---|---|
| 3 | Putting on the hardtop | Carefully lift the hardtop -6-inset A-inset B- . See Fig 1. |
| 4 | Closing locking lever at the front. | Swivel locking lever -3-8-inset C- . See Fig 1. |
| 5 | Closing locking lever at the rear | Insert unlocking handle -4-inset D- . See Fig 1. |
| 6 | Inserting plastic cover | Press both plastic covers -5- . See Fig 1. |
| 7 | Pushing on cover of the front locking lever. | Push on cover -1- . See Fig 1. |