Installing control unit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Join electrical plug connections -arrow C- and engage the locking lever downward. Join plug connection -arrow B- . Join plug connection -arrow A- , and press the connector housing to the left unit it engages. Lay lines carefully (do not trap). See Fig 1.

Fig 1: Installing Convertible Top Control Unit

Courtesy of PORSCHE OF NORTH AMERICA, INC.

After installing a new control unit, the control unit must be recalibrated with the Porsche System Tester.