Calibrating the convertible top
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The convertible top opens and closes automatically during convertible-top calibration with the Porsche System Tester. Calibration can be started irrespective of whether the convertible top is open or closed. The latching hook in roof frame 1 does not close during calibration. There must not be any objects in or on the convertible top to obstruct this.
- Connect and switch on the Porsche System Tester.
- Switch ignition on
- Select menu item "Convertible top". Select menu item "Calibrate" in the command line which then appears.
- Start calibration with the "F7" key.