Removing motor for convertible-top compartment lid drive
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Moving convertible top to service position
- Removing cover over the motor
To loosen the carpet, pull out the plastic clips with the special tool 21 and take out the carpet.-4- . See Fig 1.
- Electric plug connection for microswitch
Disengage electric plug connection for microswitch -5- on support, unlock -A- and disconnect.
- Removing motor from support.
Loosen both fastening nuts -1- unlock the electric plug connection -2- and unplug at control unit. See Fig 1.
Pull the motor backwards out of the bracket.
- Removing motor from convertible top compartment lid drive
Loosen both heaxagon thread bolts -3- and pull out. See Fig 1.
Take out motor for convertible top compartment lid drive -4- . See Fig 1.