LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Convertible Top, Hardtop - 911 CARRERA (996)) >> Removing and installing convertible-top compartment lid drive >> Calibration values, pot. 2, convertible-top compartment lid

Calibration values, pot. 2, convertible-top compartment lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
CALIBRATION VALUES (POT. 2, CONVERTIBLE-TOP COMPARTMENT LID)

Designation Dimension Note
Pot. 2 calibration value 1 >1.0 volt Tester display must be greater than 1.0 volt
Pot. 2 calibration value 2 < 3.9 volts Tester display must be less than 3.9 volts
Pot. 2 calibration value 3 < 3.9 volts Tester display must be less than 3.9 volts
Pot. 2 calibration value 4 < 3.9 volts Tester display must be less than 3.9 volts