Tightening torques
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONVERTIBLE TOP
| Location | Illustration | Thread | Tightening torque [Nm] (ftlb.) |
|---|---|---|---|
| Fastening screw on convertible-top support | -10- . See Figure. | M8 | 50 (37) |
| Fastening nut on convertible-top support | -8- . See Figure. | M8 | 23 (17) |
| Fastening nut on the hydraulic cylinder | -8- . See Figure. | M8 | 17 (13) +/-2 (1.5) |