Repairing convertible-top compartment lid drive

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Convertible-Top Compartment Lid Drive

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Repairing Convertible-Top Compartment Lid Drive Components

Courtesy of PORSCHE OF NORTH AMERICA, INC.

CONVERTIBLE-TOP COMPARTMENT LID DRIVE REPAIRING PROCEDURE

No.	Procedure	Instructions
10	Opening convertible-top compartment lid	Insert Allen key (tool kit) -11-12- . See Fig 2.
11	Closing convertible-top compartment lid	Grasp convertible-top compartment lid -12- . See Fig 2.
12	Undoing hexagon socket head bolt	Turn Allen key (tool kit) -1-13- . See Fig 2.
13	Bonding in hexagon socket head bolt	Coat fastening screw -13- . See Fig 2.
14	Calibrating convertible top	Connect the Porsche System Tester to the diagnostic socket.
		Switch on ignition
		Select menu item "Convertible top". Select menu item "Calibrate" in the command line which then appears. Start calibration with the F7 key. Calibration can be started irrespective of whether the convertible top position is open or closed. The latching hook in roof frame 1 does not close during calibration.