Preparing mounting unit (drive mechanism) for installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
MOUNTING UNIT (DRIVE MECHANISM) PREPARING PROCEDURE - TARGA
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Assembling front mount | Note: -arrow-11-8A-8-11-10A-8-direction of the arrow-8-
. See Fig 1. The enlarged collar -arrow-11-8A-8-11-10A-8-direction of the arrow-8- . See Fig 1. |
| 2 | Assembling rear mount | Position the rear input shaft connection -10B-9-direction of the arrow-9-10C-12-direction of the arrow-12-10B, 10-C- . See Fig 1. |