Installing draught deflector

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Draught Deflector - Targa

Courtesy of PORSCHE OF NORTH AMERICA, INC.

DRAUGHT DEFLECTOR INSTALLING PROCEDURE - TARGA

No.	Procedure	Instructions
1	Inserting the wind deflector -2-1- . See Fig 1.	Press the mounting arms -4-2- . See Fig 1.
2	Aligning and fastening the wind deflector -2- . See Fig 1.	Align the wind deflector -2-x-5-6-3- . See Fig 1.
	Checking function	Check whether the wind deflector can be pushed into the roof frame.
	Installing roof rail trim on both sides	Refer to REMOVING AND INSTALLING MEMBER TRIM -- TARGA, - AS OF MY 2002 .
	Closing roof and checking function	Check whether the wind deflector correctly inserts and the roof completely closes.