Removing control module
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove ignition key.
CONTROL MODULE COMPONENTS REMOVING PROCEDURE - TARGA
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Removing rear wall lining | Holdrear cover at the side underneath and carefully pull out of the clips in the -direction of arrow- . See Fig 1. |
| 2 | Undoing the threaded part | Unscrew both fastening screws -1-2-A-B- . See Fig 1. |
| 3 | Disconnecting plug -3- . See Fig 1. | Push slider in the -direction of arrow C-3-D- . See Fig 1. |
| 4 | Disconnecting plugs -4-5- . See Fig 1. | Press both plugs -4-E-F-G-5-H- . See Fig 1. |